Pages

Subscribe Now: standard

Friday, June 8, 2018

Help solve temperature fluctuation on a tankless water heater


Troubleshoot temperature fluctuation problems

Learn how to troubleshoot and solve temperature fluctuation on a tankless water heater. You wouldn’t want to get caught in an unpleasant cold water sandwich situation when taking a shower. As the water temperature fluctuates delivered from a tankless water heater after the first few minutes you enjoy a nice hot shower and then changes to cold and back to warm/hot again.

Cold water sandwich 

This problematic issue especially on an electric tankless water heater occurs when the temperature variation when the heater is on as it provides hot water. When the water is not being dispensed from a fixture. Such as the tap being closed the unit shuts off, as the water inside the pipes get cooled. The water heater turns on and the cool water inside the pipes dispenses the cooled water before the hot water reaches the fixture. This results in cold water bursting or the cold water sandwich effect.


In homes it is suggested to set the water heater to a safe 120 degree temperature. One of the main reasons why temperature fluctuates is your tankless heater stopped working due to lack of low water. Usually the minimum flow rate is around 0.4-0.5. If your water heating system is not designed properly where the capacity is smaller than the demand, such as a change in flow from other fixtures in the home are opened or closed you can ‘feel the fluctuation of the temperature drop. Today, most tankless water heating systems have some type of water filtration or may have an inlet filter screen before water reaches the heater elements. It is suggested to change the filter or clean the inlet filter screen located at the bottom of the unit every six months or more frequently depending on your homes water usage.


Restriction of water flow

Water in Florida has a high mineral deposit count the can lead to a restriction of water flow in plumbing fixture parts such as long term mineral build up deposits on faucet aerators, shower heads. It would be a good idea to flush and clean each single one. You can soak them in household white vinegar to help dissolve the mineral deposits and flush the parts toughly with water before reinstalling.


Plumbing crossover

Temperature fluctuation may occur due to a plumbing crossover of a faulty mixing valve, incorrect plumbing, single lever faucet, or failed washer in a fixture. An easy way to find out is close the main line going to the heater and open a hot water tap, wait five minutes, and if water is still flowing there is a problem with a plumbing crossover.


Water pressure

A tankless water heater normally uses constant water pressure maintained at 30 psi. The pressure needs to be consistent so if you have a well on your property, be sure the pressure is present.


Mixing Valves

Do you have a mixing valve installed; a mixing valve lowers the temperature of hot water and mixes it with cold water. Check to see the water temperature on the valve.


Before any changes to fix your temperature fluctuation problem, measure the fill time to see what the proper activation flow rate is. If your experiencing longer than usual the odds is the activation rate is not met.


If you are experiencing difficulty to solve your temperature fluctuation problems and you need other home repairs, hire a professional handyman.

Friday, June 1, 2018

Surprising common causes why a breaker trips


Our surprising common causes why a breaker trips

Electrical issues in a home may be surprising at times we laid down some common causes why a breaker trips. A breaker trip comes as a result of a circuit attached to your circuit breaker exceeding safe parameters. Here are the top five common causes why a breaker to trip overloads, short circuiting, ground faults, appliance failure, and storms may cause your circuit to flip.


Overloads

Since breakers have a safety limit built in you may have too many appliances or outlets overloading the circuit. This is a more common issue with in a home. When you overload a circuit as more the items powered in your home draw to much amperage exceeding on the circuit. The safe limit of the breaker trips the supply on the circuit this causes an overloaded circuit. One cause of more than 40,000 residential fires is attributed by overloaded circuits in the United States. If you find yourself using extension cords or multiple plug adaptors to a plug consider having an electrician install more outlets or on a new or different branch circuits to handle the demand of power.


Short circuiting

A short circuit happens when a hot live wire comes in contact with other hot wires. This sometimes can be seen on outlets in the home. The blackening around an outlet or a burnt smell could indicate a short circuit. When this happens, turn off power to the circuit and call in for an expert.


Ground fault

A ground fault occurs when a ground wire touches a hot live wire. Handle this problem as the same manner as a short circuit.


Appliance failure

As an appliance ages the components tend to fail over time. This can cause overloading to the circuit as the faulty appliance can draw more power than intended and can initiate an overload of the circuit. If the appliance is hotter than usual it may be time to replace the appliance.


Storms

Lightning strikes can travel across electrical lines and into your home, this can blow one or more of your breakers in one swift jolt. If you can’t get the power back on, just to be safe it would be a wise choice to call in an expert for repair to look for burnt wires.


Why does my breaker trip on my A/C unit?

Although it may be common for a breaker to trip due to a loose connection or result of a thunderstorm it is important to try to reset it “one time” by turning it off all the way and flipping it back on. Since breakers are a safety device as they are designed not only to protect the equipment but wiring and home as well. This problem should be taken seriously. If the breaker trips immediately after resetting it the circuit is telling you there is a problem. This is generally indicated by a direct short. Do not try to reset it again since time has come to investigate the problem with in the circuit.


If the breaker feels hot to the touch this indicates a problem to be not ignored. Remember you are dealing with high voltage and amperage which can cause serious damage to property and life.


Your A/C appliance may be causing the breaker to trip. A hard start of the compressor trying to kick on may be causing the breaker to trip. A simple fix of a “hard start kit would repair this issue by replacing the faulty capacitor on the outside unit.


Other issues such as a weak compressor, under-sized breaker or wire, defective breaker, loose breaker, loose electrical connection, weak capacitor, or a locked up motor or compressor may cause the electrical circuit to trip.


Don’t ignore a tripped breaker schedule your appliance repair today.

Wednesday, May 23, 2018

Learn how to improve painstaking dryer time


Ever wonder why your dryer takes to long to dry clothes

Learn how to improve the painstaking dryer time. Your dryer filter captures 40%-60% of lint generated. The rest gets blown thru the exhaust system as some even gets trapped in the dryer vent, and in the dryer blower housing.

Your home has the potential for a fire hazard caused within the Dryer Vent!
As the build up of lint within your dryer vent clogs the pipe over time poses a dangerous situation. As you notice your clothes may take a longer time to dry it may be symptom of a clogged dryer vent. In fact a clean dryer vent could reduce the stress on your appliance. Clogged dryer vents causes major appliance failure as your dryer overheats. With annual dryer vent cleaning it will reduce the time to dry a load. A blocked dryer vent may take three to four times as long to dry clothes costing upwards of $3.00 per load compared to the average of seventy five cents. You should avoid the inexpensive plastic dryer vent hose connecting to the dryer vent duct work since it poses a threat of melting within the extreme heat and increases the risk of fire. Check the condition of your dryer vent hose for kinks blocking air flow. It is recommended to stop using those simple dryer sheets. Instead use liquid fabric softener to reduce the amount of dirt and debris build up with each cycle. Now let’s talk about your dryer appliance failure. A clogged or restricted exhaust vent air flow is the most frequent cause of a thermal fuse blowing. Check the lint screen for lint or a build-up of debris that could be inhibiting air flow through the dryer.


But first let’s start off with the function of the thermal fuse component. A thermal fuse will blow when the temperature inside the dryer gets to high. The thermal fuse stops the dryer from operating, tumble, and heat included. Let’s say you are trying to dry clothes in a confined space such as a laundry closet. It is important for the dryer to breath since the function of the dryer is to pull the air within a room inside the home. The dryer pulls air within the space it surrounds of the room, the air is sucked and heated within the heating element housing, the then air flows thru the lint screen then into to the drum compartment, the hot dry air is moved thru the drum drying the clothes they come in contact with, the heated damp air goes into a blower housing and is forced to the exterior of the machine into the dryer venting exhaust system. If the forced air blowing within the machine gets to hot the thermal fuse will blow this would be a restriction of proper airflow from the lint filter being clogged or restricted since the thermal fuse is located in the exhaust side of the machine.


With in your machine there are some safety components to assist from keeping other potential hazards to happen within your dryer system. The main safety prevention component is your dryer’s thermal fuse to cut off power to the other components functions. It is suggested to open the door or closet door in the room or laundry space while the machine is operating.


At least once a month: Check the lint screen for lint or a build-up of debris that could be inhibiting air flow through the dryer. Remember it’s what you can’t see in the filter screen; a filmy like non-visual layer can accumulate on the filter and can cause the filter airflow not to produce adequately within the dryer venting system. It is recommended for you to wash the lint screen with warm soapy water and a nylon brush, rinse it off in hot water, and then thoroughly dry it before putting it back in the lint screen housing on the dryer.


By doing these simple tips it will help keep your dryer running efficient and improve the painstaking dryer time.


Learn more about our dryer vent cleaning service and how it can eliminate the unnecessary expense a dryer failure and keep your family safe from the risk of fire. Call for service today for your Dryer Repair!

Friday, May 11, 2018

Great mailbox maintenance you need to know



A great addressed mailbox begins with curb appeal

Great curb appeal begins with your mailbox. You want to reflect your homes appeal with the vision of a properly addressed sturdy mailbox that provides protection for a well maintained home and your mail as well. With proper mailbox maintenance you need to know you can keep your home looking good.
The next time you go out and get the mail take a moment to look at the maintenance issues that may be need to be addressed.
First look at the support. Inspect the base of the post near the ground look for wood rot, missing or flaking paint. Next shake the support post, even a little shake may let you know if anything loose and might need repaired.
Now let’s think how well addressed is your mailbox. Not to mention, you want people to find you first on the block. First responders, package delivery and service companies more often have a difficult time trying to locate your home too. A clear address can help with all the confusion.
A proper closing door helps protect your mail from the elements. Make sure you file those sharp edges that can protect you and your mail carrier.

Mailbox requirements

Mailbox and post at curb requirements:
Mailbox : minimum size 4” x 4”
Pole: minimum of 2” in diameter with height of 41” to 45” from the ground
Pole: Buried no more than 24” into the ground for support. Concrete is not recommended since it increases premature wood rot on wooden post.
                                                  

If your mailbox is in need of maintenance, Try our mailbox replacement and repair services. Contact Mr. Fix-It Handyman Service today for your mailbox issue.

Friday, March 30, 2018

Choose the right picnic table for perfect summer hosting



With summer months approaching, it’s time to think of outdoor seating for your family barbecues, neighbor gatherings, and evening outdoor entertainment occasions before summer time comes into full swing. Outdoor seating elements are vital for hosting a great entertainment space. Picnic tables are durable and practical for any gathering outdoors. Before making a picnic table purchase consider portability and choose the right material. There are many options these days for a good picnic table. Here are some questions you may want to ask yourself before making that purchase. Would you want your picnic table to be moved around easily with in the space? Would you want a picnic table to fold-up and be stored away when not in use? Would you want one that is most durable and last a long time?


So what picnic table is right for you? 

Let’s begin with choosing the right material. Steel or aluminum require less maintenance and endures a long life. They are durable enough to stand up to extreme temperatures and intense sunlight. If you’re looking for less maintenance think of one that is made of faux wood materials with recycled plastic. There is endless options for a classic wood picnic table including cedar, pressure treated pine, teak, reclaimed wood and so much more. As reclaimed furniture becoming popularity these days for outdoor decorating. Why not choose one to fit within your lifestyle. If your feeling like this is a tackle your willing to take on there are many plans for the DIY. Check out these 50 Free DIY Picnic TablePlans and Ideas that Will Bring Your Family Together from Morning Chores or contact your helpful handyman to assemble or build your perfect picnic table that is right for you. What ever picnic table you choose, you can feel comfortable hosting your summer extravaganza! Mr. Fix-It Handyman Service can help you maintain your home. Make sure to stay on top of your household repairs and maintenance needs around the home. Schedule your appointment request for service of our helpful handyman today.


Sunday, February 25, 2018

Amazing tips to bring your window screens back to life




As the temperatures rise this season, your family is sure to be opening windows for cool evening breeze, leaving your window screens as the only line of defense between your home and the insect pests trying to make their way inside. Find some amazing tips to bring your windows back to life.


Take some time now to review the screens throughout your home, inspect for holes, tears and loose-fitting frames that will give pests access to your home.


 A well maintained window screen can prevent damage-inducing dirt and grime from building up, saving you money from repairs.


An average fiberglass screen lasts anywhere from 3-7 years, depending on the sun exposure.


If you have trouble removing the screens, call a professional for help! Don’t force trying to remove them, since they bend very easily.


If the screens are full of dust or debris and wind starts to blow in, that dust or debris will just linger around your house which could be harmful for everyone. Dirty window screens are also linked to cases of sinus irritation and trigger asthma attacks for some folks. It would be a great idea to clean your window screens. A little of soap and warm water and a soft bristled brush works wonders to help clean your window screens.


You can bring your aluminum screens back to life.

Another great way to naturally clean your window screens and eliminate germs and bacteria is to spray it with distilled white vinegar that you can get at any grocery store. Pour the vinegar in an empty spray bottle, then blend an equal amount of water and spray liberally to the screen. Use a soft bristle brush and scrub vigorously and rinse off.


Remember – if your screens look streaky white and silver instead of uniform black color, not only are they less effective in dust and pollen control, they are also very weak and can easily have a hole punched through. In this case, professional replacement may be necessary.


If you need help with your screen repairs, or you realize you need some replacements. Remember Mr. Fix-It Handyman Service can repair or replace your window screens.
Call us to schedule your window screen repair today. Phone (904) 699-2356


We even replace patio screen room screening around the home.



Monday, February 12, 2018

Refresh your home with 2018 remodeling tips

Design trends for 2018

 Your passion to refresh your home begins in 2018 with remodeling. Consider a smaller scale for renovations that won’t break your budget. We will help guide you in the right direction with our handyman remodeling tips to make a tremendous impact on your homes design. Here is this years design elements and updates to get you started.


One way to incorporate schemes is through tone-on-tone encouragement with monochromatic colors this year. One approach is choosing colors and tones in your walls, curtains, and furnishings in varying shades.


Having velvet in small ways through home accents and décor will add visual interest and plush materials can gain dimensional texture to your design. This can be achieved by selecting throw rugs, furniture, and pillows that feature velvet.


Out with the old white subway tiles and in with variety tiles which have different colors, tones, and textures. Beige textured accent tiles are gaining popularity according to House Beautiful.


Brass finishes are up in rising this year. Choose glamour with a creative feel with elements of brass finishes in your light fixtures, coffee table, and appliance handles.


Current designs with artisan light fixtures are prominent for unique decorative lighting this year. Luxurious lighting may give the next level to brighten up spaces.


Consider making your journey enjoyable and less stressful by incorporating smaller tasks to get to the big picture. Hire an experienced handyman to turn your dreams to a reality with our improvements.